AH 250
Soot eliminator for wood-fired and pizzeria ovens
The AH Ø250 soot eliminators are an ideal solution for wood-fired pizza ovens. Their certified ability over 95% treatment of the soot produced by the combustion of wood in pizza ovens.
Easy to install, they can be placed both inside and outside the room.
Due to their water-based nature, they are excellent fire-fighting devices, thus avoiding the risk of the flue catching fire. Their continuous operation, in addition to 100% avoiding combustion soot and also solving the problem with the neighbors, keeps the entire section of the flue clean for a very long time.
The soot eliminators of the AH ETC GROUP SRL range. they are ecological devices, they help the environment and improve the air we breathe.
​ On request, the machine can be equipped with 4.0 technology
User manual
Data sheet
IMQ certified product: NO. IMQ 242
Our soot eliminators use the double washing technology of the Enterprise category, plus the rollé system (new 2018).
Ideal for the treatment of 1 pizza oven with a capacity of 8-10 pizzas at the same time.
NOISE
The A-weighted noise emission level. Measured at 1m from the surface of the machine and 1.6 meters above the ground, it does not exceed 70 dB (A).
Dimensions
Length 940 mm
Depth 610 mm
Height 670 mm
Empty weight: 57 kg
Water content: 63 liters
Operating weight: 120 kg
Smoke inlet and outlet: Ø 250 mm
Air flow: 350 m³ / h (static measurement, with the machine disconnected from the flue: outlet speed> 2m / s on outlet d. 250 mm).​
Very low electrical power 0.55 kw
Pump Type: Grundfos Cm 5-3
Water Consumption: 63 liters per day plus the water consumed for evaporation *
Constructed in 304 stainless steel
​
Clinear AH250 soot suppressors
they are built to eliminate carbonaceous particulate (soot) and impurities of various kinds from combustion fumes.
It is mainly used in the treatment of fumes for small charcoal grills, wood-burning ovens for pizzerias, pellet and wood stoves, biomass boilers with power up to 40,000 kw and air flow up to 350 m³ / h.
The model described has a double washing system.
The washing water can be disposed of in the sewer system.
Steam-saturated air comes out of the machine, with a temperature of about 50 degrees, free of carbonaceous particles and suspended impurities ( 95% reduction).
Odors are reduced by 60-70%.
Technical features and information:
An equipment capable of removing and breaking down the microparticulate with a yield of over 95%.
One of a kind.
Automatic operation with recycled water
Equipped with a thermometer for measuring the temperature.
Pressure gauge, pump Water mains pressure gauge.
Tap and rubber for washing and cleaning the blast chiller, incorporated.
​​
Exceptional in managing its own cleaning (once every 6 months).
Stainless steel drains including valve with ON-OF indications.
Packaging dimensions and weight
​
Length 980 mm
Depth 660 mm
Height H. 820 mm
WEIGHT: 65 kg
Internal fluid dynamics of the AH 250
